Question about Misc - MFG Microwave Ovens
20 seconds. Microwave starts to cook then cuts out after 20 seconds and the screen says refer to instruction manual. Microwave seems very hot on top and right side. Possibly think this is a fan issue?
...cut out after 20 seconds it seems to be in demo mode. My mum bless her pushed some buttons and then it cut out cannot get it to work again. it kept coming up saying lock - demo mode. I pressed the ...
...cuts out after 20 seconds what is the problem please Possibly the magnetron is not producing power and as the cavity temperature is not rising, it cuts out. Is there an error code in the
...20 seconds at 10% (ten percent) power, unit cycles on and off 4 times and then runs (stays on) for the remaining 10-12 seconds. Will not do this at 100% power. Trying to determine if Magnetron, ...
...20 secs then stops, the display returns to the time and the light in the microwave goes out. Doesn't seem to heat at all before cutting out??? 22 seconds is the giveaway. In most cases, this is a ...
...20 seconds and does not heat. Please help. Thanks The magnetron is over heating causing the thermal fuse to open to cut power, the only option is replace the part, but keep in mind it is the most ...
...seconds The latch mechanism (specifically the bottom latch which is tied to the sensor) is not locking in place. Try lubricant on the latch and receiving side first (I used wd-40, but it smells ...
cut out after 20 seconds 22 seconds maybe? The 22 seconds is the giveaway. In most cases, this is a problem with the inverter or a bad magnetron. Due to the lethal voltages used and produced, I do not
Question about Panasonic Microwave Ovens
...20 seconds and while it was running, it melted the solder loose and the plate popped off. What would cause this? Thanks in advance for any assistance you can give! The thermostat and the terminal on ...
69 questions posted
Usually answered in minutes!
3,405 Questions
567 Questions
285 Questions
308 Questions
257 Questions