Dell PowerEdge 2500 Server "test" Questions

...2008? Hello, You can look on MS website for minimum requirements or you can use the 1st disk to test your server to see if is compatable. With your server on, Put the 1st disk in your optical ...

BOOT FAIL: PCF8584: I2C ERROR Fatal error: controller kernel self test failed. Controller POST operation failed. PCF8584: I2C Error: PIN without slave ACK, status=0x08 failed ***Error: selft test ...

DELL Poweredge 2600 have the same problem in DELL poweredge 2600, as I can't use CD to boot up my system, also my CD is a valid bootable one, which have been tested in other computers. Also, I have ...

...See which disks are failed ? Try to run Power edge diagnostics on the failed disk. If it passes the test reseat the disk. if it fails disk has to be replaced with a new one. If passes the quick test, ...

Dell PowerEdge 2400 - Fatal Error: Controller Kernel Self Test Failed. Running Windows NT Service Pack 5. I would read thru the following : READ THIS For the replacement battery, review the following:

...to change the interface to another port eg if IDE, then move the cable to the secondary or if sata test the drive with another cable/port.. Have you tested the drive in another computer? OK, if it's ...

to a folder. How do I get back to my homesceen and do some work? In this situation I would start by testing the hard drive then the RAM. For the hard drive find out the manufacturers name and download

Poweredge 1950 won't start On start up the BIOS screen gets as far as Testing memory. Please wait. It tells me the Processors and System memory size and system memory speed. Then goes no further. ...

...Server Administrator (Managed Node, from Dell's Support Site) to see which drive has failed. Test the drive using Online Diagnostics. If you cannot test the drive or if the drive fails, then ...

...the monitor everything is well connected but it shows nothing on the monitor where should i start. Test another monitor and pay attention for any beep codes coming from the