D-Link 802.11g Wireless Router WBR-1310 (WBR1310) "internet modem bad" Questions

...internet. When I disable the modem, I can boot up ok. Now when I try to Enable my wireless connection, it fails. That is hardware issue ( the modem is bad ) replace the modem and it will solve your ...

...modem then wait one minute before applying power to wireless router. 3. Ensure you have green lights across both devices, specifically, the recieved and sent lights. These same lights will tend to ...

...modem indicates Internet link is up before proceeding. Now turn on the router. Does it connect to the modem? Check the lights. If the modem is connected, but the router is not, then I would suspect a ...

...internet modem lights keeps turning red every 3-10 minutes. it has been replaced three times yet the problem consists. its at&t 2wire The DSL line to the modem may be bad. It might have a loose ...

...modem. Make sure you have Internet connection. >If you have Internet connection. connect back your modem to the router. >access the configuration page of your router. >If you are given a specific IP ...

internet connection and the little light on the card does not come on The simplest thing to try first is making sure your network cable is firmly connected at both ends. Sometimes a poor connection is

...internet connection, verizon guess was the network card was bad, bought D`link DFE530TX+ network adapter,, wouldnt download,got message (unable to install instashield scripting run time) am using a ...

...modem to the router) and I am able to connect to the internet fine when I do this. I know this suggests a problem with the router but is there a specific indicator? Make sure that your computer is ...

modem not pulling in internet connection Most of the time if the modem doesn't work you can contact your ISP. I have found that most of the time modems will or will not work. Once they go bad you have

internet but not the desk top computer using the NetGear WG111 802.11g/b Wireless Adapter. The providers did walk me through check to see if adapter was working and it is but it is not allowing me via