Check the lamp switch that is located inside the door. Place the lamp in, and stick a flathead screwdriver in the slot (just make sure it moves) hold it there, and turn on the Tv. If that doesn't work
...Check the lamp, is it broken ?, or not installed properly. Check ballast lamp too , is it work or not ?. Its a simple way to check the ballast lamp. Unplug the lamp, than turn on the TV set. If you ...
...check your lamp and the capacitors on your television. Since, the lamps light is coming on, then you need to check the lamp first before you check for bad capacitors. Turn off your television, then ...
...check lamps by having the lamp holders out of the unit when you switch it on for the first time, then swap lamp connections to eliminate whether the problem is a lamp itself or the driving circuit ...
Question about Toshiba Televison & Video
...lamp timer reset? If not, check these. If you wish to get more details, check this link. http://electronicshelponline.blogspot.com/ Selecting the view option, either to Mosaic / Flip card, can be ...
...on 3 times. If all attempts fail, all LED's on the front panel will blink. Check the lamp and the ballast and replace them, if necessary. Check lamp fan too, make sure fan is rotate smoothly.
...something get spilt in it or you may have a bad connection in the lamp area.check all connections and if lamp stays on when key isn't in ignition and keeps running it will over time kill the ...
...the front comes on and the TV doesn't. Do i need a new lamp? "Yes" Or the lamp door on the set is open!, "Check lamp" most of the time the lamp will pop & fail... you will see this by looking at ...
...board, then you should replace it instead of the lamp. Be sure to check all the lamps because some of these televisions come with about 3 lamps while others come with just one. Take care and good ...
Question about Hitachi Televison & Video
...be sure it is on securely several times but it doesn't fix the problem. What else could the problem be. maybe you have lost contact at the lamp circuit! or check the lamp circuit. Bad new
38 questions posted
Usually answered in minutes!
215 Questions
73 Questions
40 Questions
29 Questions
