Sony VPL-HS51A / VPL-HS60 Multimedia Projector "reseting lamp time" Questions

...lamp time The lamp time is the time counted after the last resetting. It is shown in the OPTION menu as the usage time of the lamp. Pressing the RESET button on the remote control or the ? button of ...

time, the lamp operation time isn't reset. ? Make sure that the STATUS indicator is lit twice and the lamp operation time is reset successfully. ? The projector doesn't turn on if the lamp cover isn't

time, the lamp operation time isn't reset. ? Make sure that the STATUS indicator is lit twice and the lamp operation time is reset successfully. ? The projector doesn't turn on if the lamp cover isn't

...time, lamp time never reset. Was serviced under warrantee after lamp replacement. I suspect time accumulation on counter prevents start. No menu item to reset lamp time. Press the MENU button to ...

...replace lamp and has to be reset to omit message. You must normally use the remote control to reset the lamp time. If you do that through the menu options and reset lamp hours, it should be

lamp time after lamp replacement.  To reset lamp time follow these steps.[1]  Press the power button, so that a picture is projected onto the screen.[2]  Press the 'menu' button

lamp indicator flashes three times even with new lamp. projector powers, on when you try to start it up,lamp indicator flashes three times. Have replaced the lamp with new. Still flashes three times ...

...Lamp time 5 press and hold the reset button on the remote or Right arrow button on the projector for 3 seconds the lamp reset diagonal box will appear 6 using the up arrow button select reset. Also ...

...lamp operation time Plug in the power cord, turn on the lamp, and reset the lamp operation time by keep pressing the left arrow and the right arrow and POWER buttons on the control panel at the same ...

...lamp time in Panasonic projector model vex 500 Press the Power button so that a picture is projected onto the screen Press the Menu button to display the "Main Menu", and then press the F or G button ...