Sony VPL-HS51A / VPL-HS60 Multimedia Projector "lamp counter reset" Questions

...Lamp Counter reset and press the OK or '>' button.  "Lamp replacement counter reset?" will appear. Select "Yes" and then press OK or ">" button8 Another confirmation dialogue box ...

...lamp counter as well. The procedure for this should be in the owner's manual. This counter is a guide only. Lamps have an expected lifetime and the message indicates that the lamp is nearing that ...

...lamp counter on benq mp620 projector, projector bulb has been replaced but lamp counter warning is displayed on startup and requests buld change and reset of counter. So I'm stuck in a loop is ...

...Lamp counter reset" and then press SELECT button. The message "Lamp replace counter reset?" is displayed. Move the pointer to [Yes] and then SELECT button. 3) Another confirmation dialog box appears ...

...the lamp door on the bottom of the projector, unscrew the lamp, remove the lamp, replace with new lamp, screw in, replace door, turn on, and reset lamp counter (menu-settings-lamp counter

...Lamp counter reset" and then press SELECT button. The message "Lamp replace counter reset?" is displayed. Move the pointer to [Yes] and then press SELECT button. 3.Another confirmation dialog box ...

...LAMP COUNTER HOURS: 1. Turn off the projector and unplug the power cord. 2. Press and hold down the three buttons at a time (ON/STANDBY) (MENU) and (INPUT) and plug in power cord. 3.The lamp hours ...

...lamp counter hours of operation for the projector TOSHIBA TLP-T720 1. Turn-off the device by pressing the "ON/STANDBY" and unplug the power cord 2. In the meantime, hold down buttons "ON/STANDBY", ...

...lamp counter without OSD The projector was of with red light "LAMP" i change the lamp, but not turn it on: red light "LAMP" i think must be reset counter but i can't go into the OSD, is possible with ...

...lamp operation counter will automatically turn to zero. 4. Check if the lettering "0H" appears on the lamp operation counter in the status display. 5. After the lamp operation counter has turned to ...