Konica Minolta C6500 C5500 C6501 C6000 C7000 Developer Set C/m/y/k Dv610 "printer sensor fusing" Questions

...fusing belt sensor does not detect change in the actuator for 0.5 seconds after the fusing/paper exit motor has turned on. * Defective fusing/paper exit motor * Deformed actuator for the fusing belt ...

...out i believe it is making a very loud noise i have a brother hl-2700cn my paper gets hung up all the time in the back through the fusing piece check the sensor on the printer back the sensor arm ...

...fusing sensor before fusing 5)out put tray sensor check all sensors if you can find out and check any paper jam there and check sensor stander at normal position, also check each sensor click ok(the ...

...machine which senses the fusing unit rotation,(the sensor sometimes comes off)(remove the fusing unit and check where the fusing unit is seated). Also try cleaning the sensor with a blower or

...hot, how can you change fuser setting on this model printer hi before change 1 - Do service 2 - check the sensor the check fusing temprature sometimes cleaning the sensor solve this problems good ...

...printer LCD.  13.01, 02  paper feed issues, worn rollers or jammed paper inside of paper feed assembly.13.05, 06 fusing assembly issues, broken sensor flag in fuser or worn busing on fusing ...

...Fusing oil overflow ? The oil overflow sensor detects oil. ? When the machine covers are closed, the oil supply unit is not detected. ? When the machine covers are closed, the fusing unit is not ...

...1 is located near at the pressure roller of the fusing unit(orange roller) and the sensor below the fusing unit. Well this usually happens when the sensor is not connected or defective. that's it!

...a service code 3152. Fusing loop sensor there is a sensor just prior to the fusing unit (The Hot Part) that is stuck jammed or has paper on it. OR the sensor itself is bad. (PS-23) Schematic

...Printer board problems H2 00 Fusing unit temperature error 01 Fusing unit temperature error H3 00 Overheated fusing unit 01 Overheated fusing unit H4 00 The fusing unit doesn't heat up 01 The fusing ...