Honeywell Programmable Thermostat Heater "shorted" Questions

Ad

...turn on after I took it down to paint the wall I think I might have put it together wrong or maybe shorted out the wiring but the heat or air will not come on. What do I do? if you didnot shut thew ...

Ad

Two different fta2a tt's Blow the circuit breaker. One in the off posiytion anfd the other when turned on. yhe tt's are definitely the problem, as they short the lines together to provide the trip. wh

Ad

Question about Honeywell Heating & Cooling

1 Answer

thermostat short circuit I have a 3500 volt honeywell thermostat hooked to 3 baseboards with a combined 3600 volts. Would this cause the load wire to short-circuit and melt? Any use of a device that ...

Question about Honeywell Heating & Cooling

1 Answer

honeywell thermostat short and then went blank by mistake i short the thermostat with a wire and then became blank Check the transformer in the air conditioner/heater. There should be a fuse on teh 24

Question about Honeywell Heating & Cooling

1 Answer

...temp is reached. Any suggestions? if you turn the t stat to the off does it still run? look for a shorted wire. remove the t stat and check the wires for a short.does it work just hanging from the ...

Question about Honeywell Heating & Cooling

1 Answer

...ok when stat is not plugged in housing, blows when stat is put back in housing. You have something shorted with the W1 terminal. This could be the thermostat wiring or something with the heater ...

Question about Honeywell Heating & Cooling

1 Answer

and replace it with the value., check the felament or the the main heating part. maybe its already shorted/ burn

Question about Honeywell Heating & Cooling

1 Answer

Pilot lights up but would not fire up into heating, I have brivis buffalo 85 This is the proper cycle of a furnace and what should happen. Inducer motor kicks on, it runs for a little bit, about 3-5 ...

...is kicking off and on you have a short in one of your heating circuits. Most likely a sequencer or shorted wire. You can pull the cover off of the tstat and disconnect the w wire and see what

Question about Honeywell Heating & Cooling

1 Answer

on our thermostat it is reading E3 why is this and how can we fix it is it a newer model like a Vision Pro 8000? with those t-stats if there is a short in the thermostat wire it will short out the ...

Not finding what you are looking for?
Heating & Cooling Logo

2,089 questions posted

Ask a Question

Usually answered in minutes!

Top Honeywell Heating & Cooling Experts

Paul Carew

Level 3 Expert

3808 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Honeywell Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...