Maytag PAV2300 Top Load Washer "self leveling leg" Questions

Ad

Question about Kenmore Washing Machines

1 Answer

...self leveling rear legs, just lean the machine forward and set down slowly. the rear legs are now level. if you dont have self leveling rear legs, the legs screw in, so just screw them in or out as ...

Ad

Question about Whirlpool Washing Machines

2 Answers

...self-leveling rear leg assembly is not secure. Actually, it's only the leg on the right rear side that is not secure (right side looking from the front). What happens is that the leg is "squishy". In ...

Ad

Question about Maytag Washing Machines

3 Answers

...self leveling legs in the rear. Usually they set themselves if you tilt the machine forward and then let it fall down onto the rear legs. A little oil would also help. I have a washer with self ...

Question about Maytag Washing Machines

1 Answer

...legs are self leveling legs. You level the front then lean the unit forward and drop the back and they will level.Only drop it like 3 inches. Thank You and please rate my answer if it was

Question about Washing Machines

2 Answers

...self leveling". Try tilting the unit forward, then set it back down on the rear legs and that should do it. hello larahersc. The first thing you need is a level of course. You will want it level from ...

self leveling. I did not read this in the insulation and operation guide. I started reserching on line because it was bagging bad when cycle was spinning. So placed my 3ft level on top and both sides.

Question about Kenmore Washing Machines

1 Answer

...self leveling. If one of them legs is all the way up in the base tip the washer towards you and yank out the leg to where each side is floating. Then ease the washer back down to the floor and she ...

Question about Whirlpool Washing Machines

1 Answer

...check to see if this is the problem? Disconnect ac/cord,hoses and drain pipe, lay machine down on front side. Inspect the self-leveling bar ***'y and spray liberally with WD-40 if rusty and/or

Question about Washing Machines

1 Answer

...something is off balance and it jumps around. It is perfectly level. be sure rear self leveling legs have dropped down properly lift up at rear and let drop or pry down jammed leg with ...

Question about Whirlpool Washing Machines

1 Answer

...self leveling legs on the back. if you lift the back off the ground several inches you should hear them drop down. if not take a hammer and tap the one side that is the highest up . spray with a ...

Not finding what you are looking for?
Maytag PAV2300 Top Load Washer Logo

855 questions posted

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Brad Brown

Level 3 Expert

19187 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...