Maytag PAV2300 Top Load Washer "brake release" Questions

Ad

...brake release arm could have broken off the 2 little pins that go into the cam,,, my washer had ground off the bottom of the tube and the clip that holds on the brake release arm fell off and would ...

Ad

Question about Whirlpool Washing Machines

1 Answer

brake release. The basket will not spin if the brake cam driver is broken because the brakes cannot be released. If the clutch spring is weak, the friction between the clutch hub and the clutch lining

Ad

Question about Kenmore Washing Machines

1 Answer

KENMORE 92588210 washing machine Upon inspection it appears the brake is not releasing. What do we have to do to get the spring to pull the brake back? if it is a top load you can try jerking the tub ...

Question about Maytag Washing Machines

1 Answer

...brake does not release. I know I need to oil the brake. But I forgot the exact spot where you put the oil. I don't have the repair manual. Thanks for any help you can give. Mary Brake is released by ...

Question about Washing Machines

1 Answer

...brake doesn't release gearcase won't spin lean washer back against wall turn pulley by hand (can't remember which way) and watch the brake to see if it releases if not BE CAREFUL brake spring has 200 ...

Question about Maytag Washing Machines

1 Answer

...smelly washer issues due to poor spin speed. Most likely either part of the brake release mechanism is jamme, the thrust bearing is bad, or the reversing switch. ...

Question about Kenmore Washing Machines

2 Answers

...brake release arm or the basket drive tube assy ,,,,mine sheared off the t-post on the bottom of the basket drive tube and the brake release arm fell down breaking the 2 little pins on it,,thus not ...

Question about Admiral Washing Machines

1 Answer

...When rotated on the opposite direction to agitate the main pulley below the drum releases the brake in order to spin, remove the pulley and lower plastic components and check condition, when ...

Question about Maytag Washing Machines

1 Answer

...go into the spin cycle to get rid of access water sounds like a problem with your basket drive assembly brake release arm could be broken not releasing the brake allowing the basket to

Question about Kenmore Washing Machines

1 Answer

brake release arm that releases the brake to allow the basket to spin. it has 2 little fingers on it that lineup on the brake release cam, also check the bottom of yuor basket drive tube see if it has

Not finding what you are looking for?
Maytag PAV2300 Top Load Washer Logo

855 questions posted

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

john h

Level 3 Expert

29494 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...