Maytag Atlantis MAV6000 Top Load Washer "rubber melted washing machine" Questions

Ad

...rubber smell - either the drum belt has melted and snapped or the drum seal has rubbed too much and melted. Most likely cause would be poor drum bearings or consistent overload of washing. I am ...

Ad

...rubber door seal has melted and left a smell of burning rubber? how can this happen? type vw 1000 b Sometimes the door seal can vulcanise due to reactions from detergents. If you have noticed this ...

Ad

...rubber on the ground and more melted to the pulley on the top right. Belt had about two inch area with some abrasion. What should I replace to get this working again? Thanks for the help. For sure ...

Question about Washing Machines

1 Answer

...rubber smell You may have overloaded the washer and the belt drive system could not handle that excess mass.. The smoke and burning smell is a belt melting while trying to rotate the drum.. I would ...

Question about LG Washing Machines

1 Answer

...washing , we have tried all different wash cycles . Also have used the drum cleaning procedure often. Are you sure the burnt smell is coming from the washer and not from the dryer? If you've placed a ...

melted rubber and I found black bits on the drum. None of the clothes have been damaged but they do smell a bit. Is it overheating or something? hi Alyson. this is what i found on the internet. WHAT'S

Question about Samsung Washing Machines

1 Answer

rubber Either you have a belt that is slipping and is about to break, or you have some wires melting which could even cause the machine to catch on fire and burn up. In any regard, you will be needing

Question about Kenmore Washing Machines

1 Answer

my Kenmore enery star leaks from the door and now it won't spin and it smells like rubber melting it was my worst purchase ever. Some machines are a real pain .I agree. But please look for the origin ...

...rubber, worse than before. Started up again but would only agitate, not spin or drain water, just a hum, then would stop. We drained the water by dropping the hose. When my husband checked the bottom ...

the center drum is rubbing on the rubber door seal and melting center drum rubbing on the rubber door seal Sounds like the bearings are worn out

Not finding what you are looking for?
Maytag Atlantis MAV6000 Top Load Washer Logo

1,252 questions posted

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

john h

Level 3 Expert

29494 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...