DeLonghi DEBIGE 2440 Electric Double Oven "heat element red convection" Questions

...The heat is radiated by the ifrared broil element. Broil & Fan- Radiation and Ventilation- The radiated heat from the infra-red broiling element is distributed throughout the oven via the

...element red hot? It is warmer than usual, but does not turn red hot. Is this all normal? This is my first oven that has any kind of fan on it. The oven has internal fan at back of oven encircling the ...

heat. This model has a red lamp on the control panel to indicate when the heating elements are powered -- that lamp does not illuminate. The timers and clock all work OK. The convection fans start OK,

...heat (the display reads 135 pre-heating. Dacor tech support said (because I had recently broiled with the door open) that the high limit switch needed to be reset and that would have to done by a ...

...heat timer came back on with same result as before ending with lower element off and upper element red hot. Is the upper element controlled by the main board or a circuit in between? Isn't the upper ...

...red-hot heating element on the left side of the oven (facing it) shows through the floor of the oven. Repair person said that Electrolux said element is too close to floor of oven, but that makes no ...

...heat up, 20 minutes to reach 250. I checked the lower element with a omp meter it read 20. Is that the proper reading? What else could it be? Hello there and than you for choosing Fixya If your oven ...

...convection oven online. However, here are some general steps to follow to help you wire your oven correctly: Turn off the power supply to the oven before wiring it to prevent electrical shock or ...

...out. Push it back in and see if it works... It worked for me when I replaced my element, and last night when my over stopped giving heat, I had to open up the back and reset the button. Hope it ...

...red. This element has an expected life-span of several years. It may last for only one; it may last for many more. When the element burns out, you need to replace it. or try doing this 1. Turn the ...