Maytag SAV5710 Top Load Washer "adjusting spring tub" Questions

Ad

Question about Whirlpool Washing Machines

1 Answer

...causes this? How do I fix it? Thanks, tub is suspended from spring mounts springs stretch over time tub sags remove top cover locate spring mounts and adjust tensioning bolts tighter on sagging ...

Ad

Question about GE Washing Machines

1 Answer

GE WSM2780W Stacked Washer spin cycle Halfway through the spin cycle it starts to shake real bad. What do I need to do to fix it?? With no clothing in the wash tub take the following steps: 1. remove ...

Ad

my maytag bravo tub stops because the tub is not level. could it be the suspension rods prob need replaced Some models the bowl is suspended from the top, check all springs & shafts are connected.

spring section of the rods. Also - there are suspension springs on the bottom of the tub that could be broken and/or missing. Replace/repair as necessary. IF THIS IS A BRAND NEW INSTALLATION - be sure

Top loading washing machine tub wobbles a lot during spin cycle. I have a top loading Maytag washing machine. When it spins, it wobbles like crazy, and sometimes shuts off. I have tried to level the ...

tub was sitting crooked. So then we thought there must be a broken spring, so we replaced all the springs on the bottom, but it is still sitting crooked. We made sure the feet were adjusted correctly.

I have a Maytag "quite plus" 3 speed, 14 cycle heavy duty washing machine. Goes thru cycle fine until the spin. Tub will not spin, it's like it's trying but will only move slowly, even with no load. ...

Question about Maytag Washing Machines

1 Answer

my maytag alantis washing machine tub goes evey were the tub is not stable goes every were Check balance spring adjusters are locked off. Could be the base warping, if so it will need replacing.

...queen front load washer SWRT71 tub is tilted causing the door not to seal correctly. can the shock absorbers be adjusted not really sounds like a broken spring securing tub you need to check

...tub is very loose on the top sometimes the water won't fall in so i manually move the top over and it runs fine. is thre a broken spring or something that holds the top in place? thanks Could be a ...

Not finding what you are looking for?
Maytag SAV5710 Top Load Washer Logo

72 questions posted

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Brad Brown

Level 3 Expert

19187 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...