Power nozzle has quit working Power nozzle of Majestic 360 was just working and has quit. Filters have been changed and canister emptied. Has there been a recall on these nozzles no one told me about?
...into D4c The Rainbow D4, D4C and SE all are the same vacuum base, only changes were made to the nozzle. As long as the nozzle cord on your D4 has 2 prongs, not 3 prongs you can use the D4 nozzle ...
Question about Kirby Vacuums
...mwe with some suggetions you have to be more spicific on the model but: if you take off the front nozzle by loosen the nozzle lock, make sure the name kirby is horizontal, loosen the latches at the ...
power nozzle works intermittently brand new vacuum. power nozzle works intermittently. when you push forward works, pull back power nozzle stops working. The pin connection from the lower handle tube ...
Question about Electrolux Vacuums
... There is voltage at the power head. Although it could be a multitude of things that keep the power nozzle from operating properly, the most likely is, since it's an Epic series, Is that the power ...
...until the red triangle on the plastic piece lines up with the red triangle on the top of the nozzle. Then, rotate the nozzle release (located under the headlight assembly) until the nozzle can ...
Question about Panasonic Vacuums
How do I open a Panasonic Power Nozzle to replace the belt? The Vacuum Model # is MC-V9635 The Power Nozzle Model # is C50XABF0R014. There is no obvious way to open the nozzle up. The top part of the ...
...the brush assembly and clean channels by running under warm tap water. To clean the brush assembly/nozzle, turn cleaner off and disconnect from electrical outlet. Slide the two nozzle release
How to clean floor nozzle window I have found this so i think this answers my question. Question How do I remove the clear floor nozzle window on my machine? Answer Before starting, please be sure the
...Hello! Below are step-by-step instructions for changing the belt on your Hoover S1147. 1. Rotate nozzle to the vertical position. Lift off front cover. 2. Remove the two bottom plate screws. 3. ...
221 questions posted
Usually answered in minutes!
184 Questions
178 Questions
89 Questions
74 Questions
69 Questions
