Maytag Neptune FAV6800AW Top Load Washer "test unbalance sensor" Questions

...test is done with the washer lid raised see page 19 for the details. It is possible the Tub Displacement Sensor may have failed try this check which is in the Troubleshooting guide stored in your ...

...test is in the SM I?ve typed it out if you want to give a quick check. I?m sure you will pass and find the one-way roller clutch berings are dry/rusted and causing the dc/UC unbalance condition. 3.0 ...

test give it a try; Tub Displacement Sensor Diagnostics check. You will lift the washer lid and do this check. It is possible the Tub Displacement Sensor may have failed try this check which is in the

...unbalance issue is happening. For this issue, I have self tested the displacement sensor and it worked fine... I saw that on another forum that struts may have been issue.. so, I replaced the front ...

...show ?UC? (Unbalance Closed). If you fail this test it would be time to remove the machine front cover check if the TDS sensor has fallen of its mounting position between the Tub and the washer

...unbalance errors (dc/UC). Shout back if you have any questions. Here is a quick test for the TSD sensor but I believe you have a clutch issue. The TDS test is in the SM I?ve typed it out if you want ...

...test in this post. If you have basic mechanical skill sets give it a try. I and others will try to help you thru the issue if you decide to go forward, post back if you have questions. Rich 3.0 Tub ...

...test in this post. If you have basic mechanical skill sets give it a try. I and others will try to help you thru the issue if you decide to go forward, post back if you have questions. Rich 3.0 Tub ...

...test is done with the washer lid raised see page 19 of the SM for the details. a. Enter the Service Mode by pressing and holding the Enviro Plus and Spin Only keys for three seconds or the display ...

...test is done with the washer lid raised see page 19 for the details. It is possible the Tub Displacement Sensor may have failed try this check which is in the Troubleshooting guide stored in your ...