Question about Canon Office Equipment & Supplies
...Printer stopped working and it was assumed that the drum needed replacing however after replacing drum it still doesn.,t work If you refilled the drum, you will need to replace the chip in the ...
Question about Canon Office Equipment & Supplies
...need to reset the drum unit counter by completing the following steps: Turn the the machine?s power switch back on. Press Menu => Machine Info. => Reset Menu. Press the Up or Down Arrow key to ...
Question about Canon Office Equipment & Supplies
need to replace my drum soon, is that right? Hello Dothanson, Your machine will tell you that the drum needs to be replaced after a certain number of pages printer (roughly 12000) This is the expected
drum replaced drum but still says need new drum Check the sensors around the drum if thy are okay, replace faulty sensor, reset the drum. if the fault persist replace the drum.
...THE CYAN DRUM THET NEEDS REPLACEMENT.CAN I REPLACE ONLY THE DRUM,NOT ALL THE UNIT,OR REESET WITH A CHIP? yes you can replace only drum bur you need to replace also the drum cleaning ...
what is error message 091-935? Imaging Drum 091-935 Replace Imaging Drum The imaging drum needs to be replaced. Replace the imaging drum. See "Replacing the Imaging Drums"
Question about Canon Office Equipment & Supplies
drum could need replacing and therefore is acting up. To check if it's the drum, pull out the drum unit and look at the drum roller (but don't touch it!) you should see streaks or color changes on the
DRUM I NEED HELP REPLACING DRUM FOR TOSHIBA E STUDIO 162D. THANKS, JOE joe, to replace the drum, you need to remove the cover from the front of the drum unit it has three locking tabs,one removed,take
...drum and developer need to be replace if not those then the DEVELOPER CARTRIDGE NEED TO BE REPLACE when was the last time that was replaced? Every four drums the developer cartridge needs to be ...
drum you will need to remove the toner cart., 1-2 covers, the dev. unit (developer) and then the drum unit. You will then have to take the drum unit apart to remove the old drum and blade. *****NOTE**
108 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions