Question about Canon PIXMA Office Equipment & Supplies
piece of foam that was inside printer, but now has come out when paper jammed. Turned unit upside down to look at and now the rest of this foam piece has fallen out, but printer not jamming right now.
Question about Canon PIXMA Office Equipment & Supplies
Foam piece ripped now feeder doesn't work I had a paper jam, and when I removed the jam a foam piece (long piece that went along where the paper output/ink cartridge area is) ripped and I had to ...
Question about Canon PIXMA Office Equipment & Supplies
piece of foam is? Please advise best repair procedure. Thank you. T. Ray 1: Remove Cartridge 2: Unplug the AC Power Cord 3: Hold down the RESUME button 4: Release RESUME after plugging in the AC Power
Question about Canon PIXMA Office Equipment & Supplies
piece of foam Canon Pixma MP530 - I have had several paper jams in the last day. After clearing the last one, the paper feeds in, I hear a crunching noise (but it prints), but the paper comes out torn
piece of foam was jammed in rollers when paper was going through, made awful noise, pulled foam out, noise stopped, what is the foam and how to get new and where to install it? in this kind of printer
Question about Canon PIXMA Office Equipment & Supplies
...foam piece out. Prints ok now. Do I need the sponge/foam piece? Hi! You must replace it because the sponge absorbe your waste ink from your cartridge. If you don't replace it, your cartridge will ...
Question about Canon PIXMA Office Equipment & Supplies
...up the back and found that a piece of foam protection had bent upward into the moving parts that control the paper feeder. I folded the foam piece back to it's proper place and that fixed the
Question about Canon PIXMA Office Equipment & Supplies
hadn a peice of black/grey foam material fall out had a peice of black/grey foam material fall out of the inards of the unit. is this important? The foam goes across under the printhead and is only ...
Question about Canon PIXMA Office Equipment & Supplies
piece of foam that is wedged tightly in the track and is accessible when you lift the top cover. Unlike the pieces of orange tape it is hard to see and it is not shown in any of the setup instructions
Question about Canon PIXMA Office Equipment & Supplies
...piece of foam came out, along w/ the paper. the foam is a narrow strip, w/ a series of cut-outs on one side of it, is gray, and about 9" long, and 3/16" thick. The printer still works. Do you know ...
1,091 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions