Maytag MGR6772BDS Gemini Gas Kitchen Range "stove top broil works oven" Questions

...Oven... Electric Stove Troubleshooting Oven Not Working Top 6 Reasons Electric Oven Wont Heat Electric Range Troubleshooting Stove Terminal Block Replacement Frigidaire Electric Range Repair

stove the top works fine but when I use the oven it smokes and sets off the smoke alarms.The stove is over 3 years old Any ideas before I have to call the repairman in? A gas stove shouldn't smoke. Is

stove, the top heating element in the oven does not work or does not get red (orange). I have remove the element and place a ohm's meter on the element this appears to be Ok. There are not burnt spots

top element wont heat wen oven is on bake stove electric fridgidaire gallery model # FG778W-2 SERIE#NF52003913 The top element normally operates only when you turn the temperature control all the up ...

Kenmore electric oven, broil and bake will not work. Tested power and it is ok. Top burners all work. Stove is 2-3 years old. check continuity of the broil/bake selector, it might be faulty

...Stove top burners work, Bottom oven heats for BAKE and BROIL. Hi, The ignitor is not working right and is going bad.... have the repair man replace the ignitor, or DIY.... Check out this tip about ...

Stove top works. Heard loud clunk before oven stopped working. SOUNDS LIKE THE THE HEATING ELEMENT BURNT OUT AND ALSO THE TERMOSTATS HAVE BLOWN, I WOULD SUGGEST YOU REPLACE ALL AND YOUR OVEN WILL WORK

ge profile gas oven won't work on "bake" setting. "broil" and stove top elements work fine. If the hot surface ignitor is very red in the middle of it when turnig on the oven, it is faulty. Replace it

...stove top works fine, but the oven will not heat when I select a temperature or broil. I can hear it making noise, but still no heat! Hi. If the oven is not baking or broiling test the temperature ...

...stove top came on. No oven, broil or any of the clock or oven controls work. the elements probably fried. thats what caused the breaker to trip. you can have them tested. and replace them then ...