Samsung LN-S4092D 40 in. LCD HDTV "select input source without remote" Questions

source". I accessed the TV menu and selected "Input", then chose the "HD..." item from the highlighted list. Voila! My tv works again. try retuning it then reboot the tv and then enjoy worked for me I

...a remote I've never heard of being able to deactivate inputs on a TV. You just select which one you're using at the moment. Usually using a source button or source selection in an on-screen

input without a remote. Any ideas how to? Were you ever able to figure this out? My wlement tv remote isn't working and I can manually switch to different sources but I am unable to select without the

...a button marked AV/Source/Input. That would be the button to press till you reach the desired input. Thanks Dustin Channel buttons to switch and select highlighted input by pressing volume button ...

...(a DVD or PVR etc) then all you need is to go to the TV Menu - Settings - Input, or find an Input selection button on the remote, and select HDMI. That's all I can say without knowing the model of

select the correct input, please let me know and I will check on the exact method for switching this TV without the remote. I'm working from memory here! Hope this helps. Regards, BElectric. It's just

...or Aux 1 and 2. If not, you may want to check if your TV has a Source or Input button on it. Else, check the Menu for Input selections. Last but not least, get a remote if none of the above

...is broken and we would like to change it ti sources using the side buttons Look for an input or source select button. That will allow the proper inputs to be selected. It may even say a/v or

how do i change the input source with only the buttons on the side - no remote I do not have a remote to change the input source You can't select its inputs without a remote control.

Input, again select AV1 (depending on which AV connector you are linked you maight have to select AV2). If you have a DVD or VCR connected to the AV source, then when pressing play the DVD/Tape should