LG LMV2053 Microwave Oven "replacing door switch whirlpool" Questions

...(ice cubes stay frozen after 2 minutes). Is there a guide to replacing the door switch It's not door switch. It's the microwaves are not being produced. Do to safety issues DO NOT take apart. ...

Whirlpool Microwave / Oven. It is showing 'DOOR' when I press Start. Microwave stopped working and showing DOOR when Start is pushed. Model number: E150072SP Clean the door sensors: If your microwave ...

...whirlpool microwave. One of the door switches is broken and we need to taken door apart. We took screws out etc, but door won't come apart. ???help!! door doesnt typicaly come apart, door should be ...

...for more detailed assistance. Sounds like a fuse in the microwave shorted out. Most likely caused by a bad door switch. Recommend replacing all door switches that are there and then replace

door latch switch is mechanically intact. Next, disconnect the switch and test it with an ohm meter to see that it is actually working. It should show a short (0.0 ohms) when the door is closed and no

...door switch mounts - loose connection at the magnetron - problem or loose conneciton on the control unit circuit board - bad magnetron or other high voltage part At our site, we have critical safety ...

...door switch for the door in the microwave oven? Take the cover off, the switches should be pretty easy to replace. In the several I've done, they just snap out, unplug, and then snap back in. Hi I ...

...door sensing switch is faulty. You have to replace the switch. If you wish to get some details about Microwave oven repair ; visit the site linked here. Pull up older posts. ...

...door switch, then from door switch to control. If no damage to wires and all connectors okay, proceed to step 3.Replace door switch.Re-apply power.Press and hold any key down for 1 minute to clear F5 ...

...DOOR" My whirlpool microwave/oven combo is displaying a "DOOR" error message, and the microwave won't work. I have replaced a 20a bus fuse and all 3 door micro switches... It is still ...