LG LMV1645 Microwave Oven "glass door slides down" Questions

...glass(could be clear plastic)plate on the door slided down andexposed an inch gap from the top. I managed to take the door out but couldn't figure how to disassemble the door to get to the inside as ...

...glass slides down and wont stay up on my LG microwave oven how do I repair that Hello; My name is Peter. I am a retired field service appliance technician. I am not sure what you are talking about. ...

...glass dome. If the bulb isn't burned out, the problem may be with the switch on the oven door frame. If the switch works poorly, intermittently, or not at all, you need to replace it. HI first remove ...

door apart, be careful when you take out the top 2 screws on the inside-- they hold the inside plastic piece on , but they also hold the whole outer stainless/ glass/ handle piece on. It just slips in

...glass? i took out the 3 screws on the left side and it wont seperate from the outside case! Unplug the microwave oven from its power outlet or turn off its circuit breaker. Remove the right fuse from ...

...door and remove the glass tray. Use a flathead screwdriver or putty knife to pry off the plastic cover on the inside of the door. Work around the edge of the glass until the cover slips free. Remove ...

...door the frame around the glass the choke will pop off,, take a small flat head place it between the choke and the frame down by the hinge. pry ever so carefully it will pop out slide the screwdriver ...

...glass out when reinserting the bulb unit back in because it does get in the way. Good Luck Sadly, it looks like it. Some manufacturers are apparently making it this wayy to reduce their liability in ...

...door glass. They will probably fall to pieces when you take the handle off. Yes...this is the quality of plastic manufacturers use. PRESERVE THESE AS MUCH AS POSSIBLE, EVEN IF THEY ARE BROKEN. If you ...

...door that goes all the way across the top of the unit. There are 2 or 3 phillips screws in the front of it, or on top. You take out that plastic vent grill and look behind it. There is another screw ...