box inside i replaced the motor on the unit and when i re wired it i pulled the plug outand am not sure if i put the wires in the plug in right order Sort of lost me Grogan04. What wires, and are they
...box, it will have a double pole breaker for the red and brown and your off and running! Shastalaker7 A/C Contractor I don't know where you live, so I don't know if there is a color code used ...
...color and size.Open the terminal box below the control panel of ac and locate the wire of blowing fan.Check how many leads make sure to make sketch where it was connected from low,medium, and high ...
...box, which has to be mounted somewhere in the roof opening, has 3 12v wires coming out labeled as following. +12v from supply, +12v to t-stat, -12v from supply and to t-stat. The t-stAT will be wall ...
...are made differently from others so the colors may not match exactly what is shown here. The common screw will always be a different color from the traveler screws. Breaker Box Switch # 1 Switch # ...
Question about Whirlwind Heating & Cooling
...box. (Keep the gloves on just in case.) Their are 4 terminals on the thermostat with color coded wires attached. R-Red, W-White, Y-Yellow, G-Green. Mount the new thermostat replace wires and restore ...
...box mounted to the outside wall of the house. If yours is like that, open it up and pull the disconnect module out to disable power to the fan motor. Before working on it, verify power has been ...
...box, White Rodgers which is white in color, or a Johnston control that is blue. Some are Gray in color. If they fail, they will need to be replaced. Look it over, and see if there is a flame roll out ...
...box, get access to the motor and replace. Be sure to check which wires go where before removing and take photos or make accurate diagrams with color codes. Check that the control board functions ...
178 questions posted
Usually answered in minutes!
250 Questions
109 Questions
64 Questions
59 Questions
62 Questions