LG WM2688HWM TROMM SteamWasher "washing machine timer motor schematic" Questions

...machine apart. This video made it possible for me to do my own repair. If you are repairing a dryer or a front load washer I suggest you go to www.applianceaid.com where they have very good step by ...

...machine" ( yellow & blue) when switch is pulled, "neutral & line". (BlK , WHT) does not. tried new timer, no go. any ideas? Thanks Bob need a picture of the schematic or better yet scan it. w/o seing ...

...machine full of water. When the timer is moved to any position and pulled out to restart it, it does nothing. Either the timer is not sending power to the motor or the motor is not working. Not ...

washing machine is not spinning, and getting stuck mid cycle The washing machine fills, then gets stuck before the spin. If I then move the dial to spin and put it on spin it turns back and forth ...

...timer board or motor controller for the drain pump. If there is a fuse for the drain pump it might be blown as well. Go to Sears parts online for you model and look at the assemblies and schematics ...

timer for power connections to the motor. now monitor the 2 terminals for supply with a voltmeter to be sure. usually a schematic is taped to inside of machine so you can trace where that supply is on

...motor on timr or whole timer? The only other thing it would check is your pressure switch. This will case a no agitation issue. If you remove clear pressure switch tub from the tub and blow into it ...

...timer mechanism controls the various cycles in your washer, including the fast spin and drain cycle. Make sure that the cam is good and the motors involved are receiving power. Google unit and get ...

timer. Still no line voltage to motor. Schematic is difficult to comprehend. Line voltage as I can tell is only availabe to water temp switch, timer and tub fill solenoids. What am I not understanding

...timer clicking but teh washer will not do anything: spin, add water, agitate, etc. I took the top control panel off but can see nothing burnt and no lose connections. Any suggestions will be ...