Question about Konica Minolta bizhub Office Equipment & Supplies
...tray bit 6=1 for the 2nd tray bit 5=1 for the 3rd tray bit 4=1 for the 4th tray bit 2=0 for the bypass so lets just say you want to put yellow paper in tray 1 to have all the faxes print on yellow ...
...1 st tray lift up failured. Remove the 1 st tray,in the right side located 1 screw and in copier is a paper when blocated the tray lift gear.Remove the misfed paper and push in the tray ,open and ...
Question about Konica Minolta bizhub Office Equipment & Supplies
...should default to tray 1, but is pulling from tray 2. 1) push Utility/counter 2) system settings 3) paper tray setting On the right side you'll see the trays. Highlight the tray and press the up ...
Question about Konica Minolta bizhub Office Equipment & Supplies
TRAY 1 WON'T OPEN AFTER LOADING PAPER I was loading paper into the tray and when i went to print it came up with an error code (which has now disappeared so i don't know what it was) Now the tray will
Question about Konica Minolta bizhub Office Equipment & Supplies
...tray 1 change bit 6 to a 1 to print from tray 2 bit 5 to 1 to print from tray 3 bit 4 to 1 to print from tray 4 bit 3 to 1 to print from bypass tray Unfortunately many of the "reports" on the 250 can ...
Question about Konica Minolta bizhub Office Equipment & Supplies
...tray but 1 In properties, shows only tray 1 and tray 2 and bypass, even though there are four trays and bypass. Won't pull from tray 2 evern though there was paper the right size in it. you may have ...
Question about Konica Minolta bizhub Office Equipment & Supplies
tray 1 and rest on tray 4. Is it possible ? Use the Cover options in the PerPages Tab of the driver. This should give you the resultsa you desire. Set the job to come from Tray 4 and then specify the
Question about Konica Minolta bizhub Office Equipment & Supplies
...5.5x14 in the bypass tray 1 load the paper in the bypass tray 2 in the basics screen touch paper 3 select the button for the bypass tray 4 touch change setting 5 select custom size and program the ...
Question about Konica Minolta bizhub Office Equipment & Supplies
...select the #1 paper tray or the #3 paper tray its probly because the tray attributes are off.. check to see if the trays have the exact attribute you are printing... if not then change ...
Tray 1 - A4 Plain Tray 2 - A4 Colour (Fax Paper) Tray 3 - A4 Letterhead Tray 4 - A3 Plain I have also changed the settings so that when a particular tray finished (i.e. Tray 1 has run out of A4 Plain)
1,100 questions posted
Usually answered in minutes!
1,023 Questions
417 Questions
261 Questions
256 Questions
111 Questions