Nikon D50 Digital Camera "sd card work wet" Questions

...SD card and every combination. Tried different lenses, also without a lens. Tried with two additional Nikon brand, fully charged batteries, and also with the AC cable. Hooked to the Mac, and no "hard ...

...sd card for your pics after Verify your SD card. Maybe it got damaged. Fast way is check memory. If SD card is damaged, it should show only internal memory. Some cameras don't use internal memory to ...

...card and sd card. i put the memory card back in and it will not work. Most cameras are not water proof. You have to dry up the water before it may work? If bath water is dirty, you have to wash the ...

SD card , switched on camera. Checked mode where I can see photos and deleted all. YOU CANNOT DELETE WHEN YOU are connected to your laptop. 2. I tried using another memory stick/sd card and it worked.

SD memory card should be OK as long as it definitely did not get wet. If it did, then soak it in a glass of de-ionised water for about ten minutes, thoroughly shake it dry and then give it another ten

...SD card memory full error. Do you get the same error message when using another card or when there is no card in the camera? If you've tried a different memory card and made sure it's inserted ...

...SD card. The battery was dried and recharged, and my SD Card was working fine. I set the camera on a fan and it was getting dried. Next day I tried the camera but through a USB cable, not the battery ...

SD cards, removing and replacing the battery but nothing works. Have you tried removing the battery and letting everything dry out? Sounds like the flex connecters in the camera got wet and now it has

SD Card Actually, it shows all SD cards as "Write Protected" even though they are not locked. Ready to throw camera out the window. Any last minute suggestions . . . like, "Open the window first!" I'm

...nothing. I've tried resetting to defaults, fresh batteries, new SD card...drying it out. Nothing works. try dismantling you will find a gooey substance in a microchip. try removing it.i hope it ...