AEG 23 in. Favorit 44070Vi Built-in Dishwasher "arrow light flashing" Questions

LIGHT 3RD DOWN SHOWING AN ARROW POITING RIGHT TO A VERTICAL LINE DOWN IS RED AND FLASHING AND NOW WILL NOT LET ME PROGRAMME TO ANY MODE AND MOTOR SOUNDS BUT NOTHING IS HAPPENING Dishwasher start light

...arrow with a line under on display and the led light under keeps flashing. Try power cycling it. Turn off at the breaker, press and hold the On button for 1 minute and then turn the breaker back on. ...

...light on the control panel might start flashing. The heating element can be checked for continuity with an Ohm meter. Heating Element Assembly If lights are flashing on the control panel, the heating ...

...2H AND STAYS ON 2H ANY IDEAS Hello. First, try to reset the control board. There are 2 buttons with arrows underneath. Press and hold them both for several seconds, maybe a little longer--this will ...

how can I restart my dishwasher When I press On button, it turns on. But If I want to use arrow button, nothing. If I press Start, nothing. I followed the reset instruction, nothing happened. Always ...

...light up. It is new so didn't need delimed, just an idiot pushing the buttons. Thanks!! To reset or clear delime message, on control board there are 3 buttons. from power off, drawer open, manget on ...

...flashing lights means the control has indicated a overfill. This is meaning the overfill switch is indicating an overfill has been detected. Whether the unit has actually overfilled or not remains to ...

light flashing is an error code as you may or may not know, what typically happens is poor water circulation preventing the water from heating properly thus the heating error is displayed. (though the

...flashing on the buttons, and they won\'t turn off", the good news...It is likely nothing very serious, but the "resolve" requires some investigation on your part. What it means is the control has ...

...arrow straight line meens end of program. However the flashing lights do indicate an error codeas per the handbook. This could be the ati flood device (polystireen float / micro switch) at the bottom ...