Frigidaire ATF6000ES Front Load Washer "affinity error code e41" Questions

...Keeps pausing after running a minute or 2 Frigidaire Affinity Washer Error Code E41 = Control board thinks the door switch is open. Usually replacing the door switch fixes and clears the error

error code e41 Hello phrainer3 – Error code E41 indicates that the main control board thinks the door switch is open. Contact a professional to check the continuity between the pins in the plug and ...

...Error code E41 keeps showing. Washer won't start but goes to Pause instead. Hello Marcee Peterson - Typically error code E41 indicates that washer has detected that the main control board ...

...Affinity washer (LAFW3511KW0) with an E41 error. I have unplugged to reset (no change), checked the stricker (fine), removed outer seal and disconnected and reattached (I also received an E41 error ...

...Affinity Washer Error E41 is a door lock error. It means the primary control thinks the door is open. If the door is closed and this error persists, then in most cases, you will need to replace the ...

...Error code E41 indicates that the main control board thinks the door switch is open. Contact a professional to check the continuity between the pins in the plug and door strike. The unit either has a ...

...Affinity washer stopped working in middle of cycle and shows E41 code. I tried to restart it but I don't hear the door switch clicking as I usually do, and it will not start the cycle. There ...

...Affinity ATF800FS. THE DOOR IS LOCK BUT THE DOOR LOCK INDICATOR WONT LIGHT UP & THE WASHER WONT SPIN I appreciate your post, Trent! Based off the information you have provided your Frigidaire washer ...

error code How do I clear error code41 so that the machine will run? E41 =Control board thinks the door switch is open. 1. Remove the door lock assembly and measure the resistance of the PTC. Shorted ...

...error code E41, which states that the control board thinks the door is open. It is either the door contol switch or the console control board. Of the two which is the most common for failer? I would ...