Whirlpool GBS307PR Electric Single Oven "door stuck turned" Questions

...door is stuck. When the door doesn't lock you can't do a self clean. They don't want you to be able to open the door while the oven is 800 degrees? or so. Look just below the little button that gets ...

...dual fuel. When i open the door to look in the oven the convection fan blows 450 DegF air right into my face. My old viking turned it off when the oven door opened door switch is stuck,clean or ...

...door lock is stuck in the locked position with the door open Hello, Thank You for using FixYa. I will be helping you today.Turn the power to the unit off and open the door all the way.Then turn the ...

...door switch might have got stuck in locked position, or broken in locked position (to be replaced), let's hope it's just stuck...which you'll need to work the mechanical lock-unlock latching back and ...

...selector to "Off" and wait for motor to unlatch door. If it's stuck you can either manually unlatch it from above or rear or use a coathanger wire made into a hook to catch and release the door

...Door Locked After Cleaning I used the Cleaning feature last night and now the oven is stuck in the locked position. Is there anything I can do to get it to release? Go to electric panel. Turn off the ...

...door is stuck in open mode. Turn the operating mode dial to self-clean, then manually hold in for about 20 seconds the light pin on the oven rim. The lock will eventually open after 20 or so seconds. ...

...door lock either not moving or getting stuck closed again you will need a new door lock assembly. If after hitting the start button, the door lock seems to be working fine, the door lock had probably ...

door latch may have over run its normal reach causing it to stick . ck the lever / also try putting it into a clean cycle while holding the latch in the closed position ... i thnk the latch is stuck .

door is closed AND oven is in use. the door switch contacts are stuck closed causing the oven to stay on.if you can access the door switch try to wd-40 on it.if that doesnt help you need a door switch