Whirlpool Duet GHW9150P Front Load Washer "stop clothing twisting" Questions

...not draining properly My pant legs and long sleve shirts twist into a knot, every time. How can I stop this from happening? Most likely bad ...

Whirlpool Duet Washer has done GREAT for two years..now suddenly, ...small load of clothing is stopped mid cycle with the F-21 blinking, blinking and all the lights in the left panel of the washer ...

...stop it is to unplug it. There is a small access panel on the bottom of these newer Maytag and Whirlpool washers. Three small quarter inch screws hold the panel in place. Once the screws are removed ...

washer is in rinse cycle but stopped working. full of wet clothes and water in tub. don't know what to do Sounds like the lint catch basket, located with the drain pump is clogged with lint, debris or

My washer has stopped working and flashes F 02? Not sure what that means. All of the option buttons work, but I cannot start or pause the load to unlock the door. My clothes are sitting in water, and ...

...unlock. To unlock I unplugged washer to reset, then started new cycle, then pressed pause twice to stop and it unlocked the door. I then followed advice for solution #3 to clean out filter and found ...

...you install the boot completely over the fill tube. There should be a ridge on the tube where to stop. Sometimes the tube is not inserted all way into the boot and water will leak behind it. The ...

...out twisted around each. All of my clothes come out twisted around each other. What can I do to stop this? They are completely wrinkled and are still wrinkled even after I dry them in the dryer ...

...got so twisted in the bellow i thought i was going to have to cut them the washer must not have stopped the cycle the rubber is still inplace and i got the wire back on but now it does not wash

White spots on color clothes I've stopped putting bleach in my washer dispenser all together, for months now. I have run an empty load in the washing machine to clear any residual bleach that may be ...