Whirlpool Duet GHW9150P Front Load Washer "reboot washing" Questions

duet washer with f35 code f35 code what is this. I need help. unplug it from the wall and let stand for 5 mins - sortof like rebooting the pc Plug back in and reset the dial to whatever you require

my control panel is locked Any suggestions/ my control panel is locked Any suggestions/ What you need to do is, unplug unit for 30 mins and try again, this should reboot the contrl panel

Duet Sport stopped in mid cycle About 18 months old, stopped in mid cycle, washed but has not rinsed (downy is still in dispenser). Flashing code of F- with time left in cycle. What does that mean? ...

...the unit in its current location? Try unplugging it for 10 minutes and plugging it back in to reboot the computer control. Other than that it's time to call in a

ERROR HAVE ERROR OF THEN O40 Read the Manuel and see if they offer an over ride, first. Try unplugging the machine and rebooting it! If no go you will need service at this time! A&E Factory Service is

...restart it. If you can't reach the plug, use the breaker to cut the power for 5 minutes. It's like rebooting your computer when its acting strange! Usually it corrects some error problems if they

...restart it, I've tried holding basically all the buttons down for a few seconds to see if it will reboot, but no - it's just flashing 1 minute. unplug the unit, count to ten and reconnect ...

...ngfam at you service! happy to assist! Unplug the washer for 3 minutes, plug it back in and then reboot the washer! Do you have the owners manual? It should be in there!! Let me know how it goes ! ...

...computer chips to operate. Unplug the product for a few minutes, then plug it back in. This will reboot the chips much like your computer at home. If problem persists, call a professional service ...

...means the door could not lock. Check the door for obstructions when you close. To remove error, reboot the washer. Check power cord. If there is power to the machine then the problem is probably ...