...immediately locks again. There is no further action except the timer counting down until f-28 code. There is no tub rotation and the ccu was replaced. I see you did a couple of tests and replaced the ...
...does not work: Unplug washer or disconnect power for one minute. Plug in washer or reconnect power. Re-select the cycle and press Start. NOTE: If the error remains on the display, call for
Question about Whirlpool duet Washing Machines
...Power? button. - For Kenmore Elite HE products, move to the next step. d) Select the ?Normal? wash cycle. e) Select the hottest wash water temperature available, (not all temperatures will be ...
Question about Whirlpool duet Washing Machines
...start the machine to clear out the cycle. Now the "control locked" light is lit & the whole system seems to be frozen. Can you help? Hi, Please refer the user manual for guide line some of the ...
...immediately get the SUD error. There are no suds in the machine at all, it has never actually started the wash cycle. It does this without any detergent at all. Turn the machine off and try again and ...
Question about Washing Machines
...start drain cycle) but the pump makes a loud noise no water so I aborted via the immediate stop button. turned main power off / on and retry - same result Very grateful for any tips I would check for ...
...shown. DO NOT PRESS the OK button shown at the bottom of the screen. Press the START/STOP and POWER buttons simultaneously until the Home Screen is displayed. Your unit is ready to function
...start on spin cycle. Model no Q1435(C/S/V) This is what I found: 11. OVER CURRENT ERROR - Display shows 8E . - IPM fault signal (that is caused by the overload of MICOM INT0 during motor action) is ...
power switch turns on before pushing the start/pause button? If so, there is a problem with a short circuit of the triac of the controller. Change the controller. (2) Does water fill even though it is
...power switched off it doesn't let me to open the door straight away. Door lock light is lit up. To open the door I need to wait or run a complete "pump out" cycle. Its normal for the door not to open ...
11,378 questions posted
Usually answered in minutes!
187 Questions
64 Questions
34 Questions