Whirlpool Duet GHW9150P Front Load Washer "connect pedestal" Questions

Ad

Question about Whirlpool duet Washing Machines

1 Answer

...the following: Check the drain hose to make sure it is not kinked or clogged. Check the electrical connections to the pump and ensure the pump is running. Remove the drain pump filter and check for ...

Ad

Question about Whirlpool duet Washing Machines

1 Answer

My washer will not agitate and shows a code of F25, Can you explain? Hi, to fix f25 (happened to me after 1 month and I purchased a floor model) the fix is easy and does not involve a circuit board ...

Ad

Question about Whirlpool duet Washing Machines

1 Answer

...pedestal below. What do we do? A lot of concerns have been raised about door bellows molding, mildewing, and/or ripping and needing replaced. A replacement bellow isn't cheap (prices vary, but are ...

Question about Whirlpool duet Washing Machines

1 Answer

...water will drip down the outside of the tub and collect under the unit. Be sure that the hose connected to the inlet nozzle is tightly clamped. Replace the nozzle if you find cracks in it. If ...

Question about Whirlpool duet Washing Machines

8 Answers

Error code First load ever washed in it and SUD appears. I try to run an empty load through it to try to get the suds out, but error code F 35 appears on the screen then it won't do anything. Our new ...

Question about Whirlpool duet Washing Machines

20 Answers

...will not drain. When activated, I can hear a faint humming sound. Drain hose is clear, electrical connection at the outlet is good. How do I take the back off? Any suggestions? The hum you hear is ...

.... Different Whirlpool washers have slightly different placements of the screw locations for connecting the washer to the pedestal. Using a pedestal that doesn't match the washer could lead

Question about Maytag Washing Machines

2 Answers

...the dryer. There's got to be some way to stabilize the top of the machine. I've considered straps connected to the wall behind it and perhaps wrapping around the machine or bolted into the back.

Question about Frigidaire Washing Machines

1 Answer

...is a faulty water valve. Regrettably, this is not a simple DIY job. I would strongly recommend connecting with a professional to narrow down the precise issue before investing in parts that may ...

Question about Siemens Washing Machines

1 Answer

Wrench for levelling. Elbow for attaching the drain hose, e.g. to a sink. Depending on the type of connection, the following may also be required Y-connector (can be obtained from any hardware store)

Not finding what you are looking for?
Whirlpool Duet GHW9150P Front Load Washer Logo

11,378 questions posted

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...