Question about Amana Washing Machines
...control locks. No start with open door! All washers designed to stop if door is opened. If that switch is stuck in the open position that could be a source of the problem. also check that power is ...
Question about LG Washing Machines
...2015 model was washing a load and then suddenly powered off with a burnt electrical smell and would not power back on Obviously there’s a wire or control board component burnt. You or a competent ...
...control panel.10 Apr 2015 Washing Machine Will Not Start - What To Check - How To Fix or try this link. ...
Question about Whirlpool Washing Machines
...2015 basic model. this is real danage on work on micwave they care a hight volt tranformer that contain volt even went it unplug , unplug micwave you should be able to remove the front control panel ...
hot. Works on cold. Thanks If the Fill light is flashing or H2O SUPPLY is scrolling on the display (2015 and newer models): the washer will initiate a 3 or 4 minute lock-out period (depending on model
Question about Samsung Washing Machines
...control panel and board in position. A washing machine making a loud noise when spinning means a part has become worn out or loose. ... If the loud noise only happens when the washer is in spin mode, ...
Question about Washing Machines
...Control wants to make the motor spin but won't do it because it's getting a weird reading from the tachometer.... MAH6700 and MAH8700 models (they use the same motor). I have a samsung frontload ...
...control panel display "Lock" Samsung washing machine error code 4E and E1 Fault Not ... www.youtube.com/watch?v=cFlnxeB0P0g BY HOW-2-REPAIR.COM 9 MIN 19K VIEWS 2015-11-24 · Video embedded · ... ...
11,378 questions posted
Usually answered in minutes!
187 Questions
64 Questions
34 Questions
