Delphi XM SKYFi2 1016211B1 Satellite Radio Receiver "1" Questions

ID 4Z9AB0MC activated 2 days ago. Cannot select channels. Thumbwheel only displays 3 channels, ch.0,1,247. When pre/dir is pressed and a channel is selected, the selected channel number flashes ...

...0 and get your serial number. Then, make sure you have a good signal, leave radio on Channel 1 for 1/2 hours after calling 1-800-XM-RADIO and ask they to refresh your radio. They will tell you ...

can I use a stiletto 2 home kit for my Stiletto 1 receiver? I have an opportunity to buy a Stiletto 2 home kit for cheap. I have a Stiletto 1 reciever. Will it work with the Stiletto 2 home dock? no ...

xm2go stuck at preview channel 1. if other channels are selected it bounces back to channel 1. I had a what sounds like the same problem. More than likely you need to "reset"(our account with XM Radio

The radio on my 2010 Subaru WRX has A Sat button on the radio. How do I get an XM Tuner to activate this button? Many/most of the original factory radios with the 'XM' button already have the tuner in

...a factory reset Menu -> Factory Defaults If those don't work power of your radio and press: 2-1-1 + Push down Tuning Wheel This will erase all of your

...the numbered keys to set a preset. Just press them when you want to go to that station. Holding "1" sets preset 1. You can also change your band to have 10 presets on band A, B, C (some radios

bell reciver 3100 reset smart card for bell3100 reciver without phoneing in to bell Bell now says you can add old receiver to your account if it has not been activated for over 1 year. Just tell then ...

...delphi x250 mp3, I need to know where in the plug it goes http://www.cobaltss.net/gallery/files/5/1/4/1/28046472ConnView_sp.jpg ...

...dock connector has a cold solder. Resolder the antenna pins to the board. The antenna pins are the 1 n-shaped pin (connects to 2 pads) with 1 pin in the middle. Resolder your middle