Avanti W789SA Top Load Washer "overloaded quit spinning" Questions

...quit spinning, it will spin and through the whole sycle when its empty buat as soon as I put a bit of clothes in, it won't spin, it just quits and beeps. What could be the problem?? sounds to me like ...

My GE topload washer fills then starts to agitate then stops,same with the spin cycle,it starts to spin then quits.If you turn off machine during the cycle then turn it back on,it starts again then ...

Whirlpool Duet GHW9150PW1 very noisy when spinning Our Whilpool Duet has become very noisy when spinning. There is metal shavings on the floor and it looks like the metal (inner?) drum is not quite ...

kenmore he washer getting an F 51 code and washer quits just beeps The F51 error code indicates that the control is not sensing proper motor movement through the signals from the RPS (rotor position ...

drum shaking when spinning susspencion legs wear quite a lot make sure you are not overloading or underloading the later is more common......

...back and coloured black or red. Give it a push and if it clicks then the motor might have just been overloaded and shut itself off.There is a big connector located at the motor - giving power to the ...

quit working. It will not spin or drain and makes a noise when it tries to agitate (it doesn't actually agitate, but moves slightly). We replaced the pump but that did not solve the problem. Any ideas

...back and coloured black or red. Give it a push and if it clicks then the motor might have just been overloaded and shut itself off. There is a big connector located at the motor - giving power to the ...

overloaded the washer and it quit spinning. We took most of the wash out and restarted it. It worked OK for a day but then started leaking at the bottom. Checked the outside hoses and drain, OK. Check

my maytag mah2400aww stop on 55min why it let water in and the tub turn then stop on 55min On what cycle is this happening or is it on all the cycles? I would shut the washer, then I would run the ...