Akai PTH5498 54" Rear Projection HDTV-Ready Television "convergence stk" Questions

Ad

Question about Mitsubishi Televison & Video

1 Answer

STK" is electrical engineering slang for "Convergence Amplifier Integrated Circuit".Here's a helpful Solution archived at FixYa:http://www.fixya.com/support/t4337218-image_bowed_lineYou'll see

Ad

Question about Televison & Video

1 Answer

...STk's look good. I have no convergence control at all. Any ideas or schematic would be appreciated. Thanks, Dan Hi..... Bit of a long shot but have you tried this?? ...

Ad

Question about RCA Televison & Video

2 Answers

...the STK series convergence amps.The convergence power supply is what you need.I will provide that number for you after while. WHAT IS IC NUMBER CONVRGENCE POWER TV RCA MODEL P52960 CHASSIS PTK ...

Question about Televison & Video

1 Answer

...Convergence IC failure is very common. The solution is to replace the STK chips, check fuses and the resistors next to the STK chips. Replace as necessary and re-align via the service menu. It is ...

Question about Zenith Televison & Video

1 Answer

...a difference with Sanyo and Sanken STK IC convergence chips? Just the name, Sanyo quit making the STK series several years ago Sanken, Toshiba and Mitsubishi all have good versions of the STK

Question about Pioneer Televison & Video

1 Answer

...STK convergence ICS and some or all it resistors are dead.The convergence board the 2 STK Convergence ICS and those resistors must be change to solved the convergence problems.The shop will cost u ...

...convergence problem. You can get the parts, instructions, and repair support from www.TvRepairKits.com Hi, thank you for visit fix ya. Solution: Replace STK 392-110 ( with stk 392-150 is better). for ...

Question about Panasonic Televison & Video

1 Answer

...manual to my [email protected] address. I'm hoping to resolve this issue based on what I have been reading. may not be convergence may be a bad stk for convergence if that style if so try ...

Question about Akai Televison & Video

1 Answer

...2 STK convergence ICS was defective.Now the 2 STK convergence ICS are now totally dead.The shop will cost u $300-350 for parts and labors for the 2 STK convergence ICS,and it supporting

Question about Toshiba Televison & Video

2 Answers

...STK convergence ICS and some or all it resistors are ded.These parts on the convergence board,must be replaced,to solved the tv convergence pictures problems.The shop,will cost u $300-350 for parts ...

Not finding what you are looking for?
Akai PTH5498 54" Rear Projection HDTV-Ready Television Logo

193 questions posted

Ask a Question

Usually answered in minutes!

Top Akai Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

matt martin
matt martin

Level 3 Expert

1259 Answers

Accurate TV Repair...
Accurate TV Repair...

Level 2 Expert

59 Answers

Are you an Akai Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...