Western Digital Caviar WD800BB 80 GB Hard Drive "set jumper slave" Questions

set to slave. otherwise they are conflicting for the Active partion and bootloader. Regards Richard. The Seagate with Windows XP must be as master. Set WD as slave. If you want it ooposite way around,

...set the jumpers on the HD to slave ? thanks you can find the jumper settings printed on the top of western digital caviar hard drives slave setting with the hard drive end jumpers facing you is 2nd ...

...jumper settings for slave drive WD1600JS The BIOS is AMI. Under ADVANCED SETUP: The options listed for 1st,2nd ,3rd Boot device include: IDE-0 means Pri master ? IDE-1 means Pri slave ? IDE-2 means ...

...aspx?sq=wd%2080%20hard%20drive&sl=en-US&sc= Good day!Google the settings of that brand..usually I put the jumper in the middle for both master and slave present will occur.. regards, ...

...on the back of both hard drives. You need to set the primary hard drive jumper to MASTER and the secondary hard drive jumper to SLAVE. Here is a picture of the jumper settings. I hope this helps

jumper setting for wd200bb 20gb hard drive for slave Slave - Installing the new drive as the secondary drive: If installing your new Western Digital hard drive as the secondary drive on the cable with

What Jumper Setting Do I Need To Use A WD800AAJS As A Slave Drive? look closely at the back of the hard drive, in small print it should say where to put the jumpers to make it a slave

...jumper positions. If not marked clearly, you will need the manufacturer's data to determine that designation. If you are curious about a working system just power-up in set-up mode (usually by ...

...set the jumper on the 40GB to Slave. Also, before it boots, try to get into the BIOS setting and make sure your compter can see both drives. If not, double check jumper settings for both drives. Turn ...

...set a jumper. the jumper is usually located in between the ribbon cable connector and the power connector, the legend to know where the jumper goes to make it a slave or a master is usually on the ...