Estate TEDX640JQ Electric Dryer "auto dry work" Questions

for timed dry and automatic dry. Timer works, but in auto, dryer keeps working and doesnt shut off. Dryer is working except for not shutting off in auto dry mode Auto sensor is not working. Replace it

...Auto Dry Cycle Model 417 59012890 the dryer will leave the load very damp in auto dry cycle.It works fine in manual have check duct and impeller thank you for any help You may not be giving the ...

...# is MDG9206BWW i got to know what cycle you are using the timed dry or the auto cycle timed dry you may have a bad timer if auto dry it coult be the auto dry resistor or it could be a clogged

...go bad? The auto dry sensor in the dryer could be bad or the wire to the auto dry sensor may have come loose. If these parts are OK and you are getting heat in auto dry then yes,it would be the

Auto dry not shutting off, timed dry works fine. First I had no heat and replaced the high-limit thermostat. Now the auto dry will dry clothes, but it will not shut off. The timer will not advance. In

Auto Dry Cycles? I have a Kenmore Elite HE4 Smartheat dryer with auto dry cycles drying options but it only gets hot when I use the manual cycles settings. Probably the Moisture Sensor Bar has failed.

...auto dry" features are controlled by a thermostat that is in line with the timer motor. If you have a gas dryer especially, a clogged or obstructed vent will stall the auto dry feature. If you can ...

...Auto dry cycle Our dryer has started drying clothes for 7+ hours at a time. I don't know that it would ever end the auto dry cycle (even though the clothes are dry)unless I stop it manually. It seems ...

...dry on auto dry. on auto cycle timer starts at 40 goes down to 36 then jumps to 46 and takes a long time to dry clothes. dryer worked fine on the manual setting though. Dryer has good air flow and ...

...dry, auto dry setting does not advance Whirlpool Gas dryer Lgr5620kq1. Checked all thermostats, fuses,and heating assembly parts. When set to auto dry (high heat), dryer starts fine, flame lights up ...