Fisher and Paykel IWL12 Top Load Washer "add water valve" Questions

add enough water...clothes actually come out with dry spots....don't feel as though clothes are able to really get clean with so little water...is there any way to override and add more water?

add enough water to run a wash cycle or add rinsing water. I can manually turn machine off and on to add enough water to complete wash and drain but still no rinsing water. everything else works fine.

...The drum will turn when it goes to add water you hear click click click click click Will not add water Check voltage to inlet valve , if present it is failure of the inlet valve: click on : inlet ...

add water to to rinse? It adds water to wash, but not to rinse. First you must check water in drum. If is inside drum water than could be problem with drain water. If is not, than is problem in phase

...add or adds small drizzle of water Turn off the cold water valve supply to the washer and unscrew that hose off the back of the machine. Take the screen out from inside the washer where the hose was ...

...add cold water perhaps hot if connected run a cycle and after a couple of rinses will add softner so it uses the same valve as rince{cold water} so will be a dule valve and two channels hot and cold ...

...add up if it runs all night) if it does your water valve is bad..Replace.Sometimes the vales can stick open a little it is caused by buildup inside valves from minerals and other items in ...

add water turn washer on starts cycle, agitates but does not add water If the taps are turned on and there is no water going into the machine it sounds like you need the water inlet valve assembly. It

...water valve off. This occurs during spin cycle when it adds water but the water never shuts off and it will run and overflow even after the cycle is over and the washer actually thinks it is done! ...

Add clothes evenly, turn on get no water, water is turn on, makes a humming sound but is doing nothing? somebody can help please. Thanks sounds like a valve fault. this fault can be caused by the ...