Question about Keurig Coffee Makers & Espresso Machines
...water level back toward the top and and hold in that position,the machine will think there is water. Then put a cup under the head and select a cup. The water will come out. You must hold the disc up ...
...water level back toward the top and and hold in that position,the machine will think there is water. Then put a cup under the head and select a cup. The water will come out. You must hold the disc up ...
Question about Coffee Makers & Espresso Machines
...it into the reservoir. Maybe your message refers to that. There's also another hose that returns excess water back to the reservoir but that is not a part of this solution. Hope that helps. Mark ...
Question about Keurig Coffee Makers & Espresso Machines
water into the sink, and push the tube back into the plastic clip holder. Position the back access panel onto the coffee maker and secure with the thumb screw knob. How to Empty the Water Reservoir on
Question about Keurig Coffee Makers & Espresso Machines
...back on the machine and fill it with water carefully as not to move the disk. When the water level gets to the correct position, the prime error will go away. I received the same error and tried the ...
Question about Keurig Coffee Makers & Espresso Machines
...water drips back into reservoir Super Easy, just put white vinegar into the reservoir. Run it through into a coffee cup, pour it back into the reservoir and repeat. Then let it sit in the lines for a ...
Question about Bunn Coffee Makers & Espresso Machines
...back into the reservoir. Let the water heat up again, and let the vinegar solution sit in the reservoir for about 30 minutes. Top off the carafe with cool water and allow the carafe to cool with the ...
...water coming back into the reservoir is very hot; almost no water goes into the coffee mug. Sorry to read about your problem, I hope this helps you out. you can contact Keurig at 1-866-901-2739 or ...
...was a BAD idea. This thing will probably go back, poor quality- mine does it when there's not enough water in the reservoir. There's a floater and the spout at the bottom. Make sure both are
...water reservoir and drop it back into place. There is a magnet that has to be in the right position and putting the reservoir back into place causes it to go back where it should be. This method has ...
1,057 questions posted
Usually answered in minutes!
1,392 Questions
801 Questions
453 Questions
366 Questions
296 Questions