Brother SE-270D Computerized Sewing Machine "shuttle" Questions

...the parts below the presser foot. Can you help me to know where to add the drops of oil onto the shuttle? From the Sears Kenmore manual: Using a small brush, remove the lint that accumulates in

bobbin and shuttle case pop out of machine . I have a kenmore sewing machine model #14812181, this machine has sewing with out any problems until now. forsome reason it started poping the bobbin and ...

shuttle hook not moving on singer Machine is clean and cannot get the shuttle hook to move when turning fly wheel. It is a singer 413 probably means the shuttle is not positioned properly loosen the ...

Can't reassemble shuttle hook and shuttle race Have Baby Lock 1556. Removed shuttle hook to clean shuttle race. Can't get it reassembled. Manual isn't much help. the hook driver (still in machine) is ...

how to put string into the shuttle I take it you have a shuttle with a bobbin inside. Remove bobbin and attach it to the bobbin winder by the balance wheel, wind bobbin and while holding shuttle point

Necchi 3537 manual is useless. How do I put bobbin shuttle hook back into the machine? This is the part of the machine where the bobbin case with bobbin is inserted into. You are in luck, Wren Paasch ...

How do I load the shuttle? I have wound the bobbin and put it in the shuttle and when I try to load it it just falls out If it is an older model sewing machine, there is a little flap on the bobbin ...

shuttle i took my shuttle apart to clean it and put it together with manual but the needle hits using the way they showed and if i adjust to different way it will not pick up bobbin thread with top ...

My New Home 346 Sewing machine thread gets caught in shuttle Thread gets caught in the shuttle - even when there is no bobbin - (I have been trying to look whats wrong) what can I do to fix the ...

I was sewing on my Consew 206Rb-4 when the thread jammed in the shuttle area. I have removed the shuttle, needle, and pulled what thread I could see out. Turning the wheel to raise the needle is not ...