Brother HL 5250DN Laser Printer "reset drum setting" Questions

Reset the Drum counter as follows: Open the front cover. Locate the control panel button under the LED lights on the left side. Press the control panel button until all lights are lit, then release it

BROTHER HL-7050 CHANGE DRUM STILL INDICATES CHANGE DRUM you need to reset drum counter by pressing go & + together "reset parts life" "drum unit" then press "SET" button. that's it.

...reset the drum counter on a brother printer HL5270 DN My printer prints fine but tells me the drum needs replacing! It stops working until I have turned the machine off then on. There should be a way ...

reset your drum by opening the front cover and then press the resume buttom until all the LED light up...then release the button and close back the front cover... you can check your printer setting by

reset drum unit counter brother hl-6050-dn Press the "Go" and "+" switches together until the menu "RESET PARTS LIFE" appears on the LCD display. Select the Drum Unit using the "+/- " switches, then ...

drum light keeps flashing is that you have to "reset" the machine after you've installed a new drum. To do this, I believe all you have to do is make sure the printer is on and then push and hold down

...reset the drum light "Brother's webpage says to reset the drum counter. On some models this is done by opening up the front door, pressing the GO button until all 4 lights are lit, then releasing the ...

...sure that the Toner, Drum and Paper LEDs are off.d) Press the Go button seven times. Make sure that all the LEDs light up to indicate the print server has been reset to its default

...RESET the Drum Press and hold down the white Go button for about 4 seconds until all the LEDs light up. Once all four LEDs are lit, release the Go button. To RESET the printer back to all default ...