Question about Brother HL Office Equipment & Supplies
...new drum on hand for when print quality starts failing. Either new drum units have a reset fuse in them to clear the warning light, or there is a reset proceedure to use after installing the new drum ...
Question about Brother HL Office Equipment & Supplies
...DRUM IS QUITE NEW, PLEASE ADVASE THANK YOU it has a drum sensor ,it was disable to work but it look like new please change ot replace drum unite not only drum total unite then solve your problem ...
...otherwise your printer will not work export elvis Hi I had a same problem. I replaced drum with new one but drum LED is still on! its cheaper to buy a new printer than to replace the drum unit
...end soon" signal on for about one month You will need to replace the Drum unit with a new one. To try to get it working for a short temporary fix, clean the Drum corona wire - might work, might ...
...new one. The Drum LED continues to blink if the drum counter was not reset when you replaced the drum. To reset the drum follow the instructions below: Open the front cover of the printer. Press and ...
...Replace this unit and clip your toner unit back onto the new drum unit and re-install it in the printer and follow the instructions that came with the replacement drum unit to reset the drum
Question about Brother HL Office Equipment & Supplies
...almost at its end. Is this a NEW Genuine drum or one of those refurbished ones? Only genuine drums will work unless your were given some sort instructions on how to overcome the self check
Question about Brother HL Office Equipment & Supplies
...new drum DR-400 in my brother HL-1240. I think I followed the directions correctly, but the yellow need new drum light is still on on the printer. I turned the printer off and on again several times ...
...drum in new 2140 printer and it worked just fine. Problem directly related to printer itself, and not toner/drum? Look inside the printer and make sure none of the pins that contact the drum are bent ...
...new drum As posted by Songdancer - this solution worked for my HL-1440 to reset the drum light "Brother's webpage says to reset the drum counter. On some models this is done by opening up the front ...
488 questions posted
Usually answered in minutes!
1,072 Questions
495 Questions
422 Questions
249 Questions
188 Questions