Question about Brother MFC Office Equipment & Supplies
...reset fuser life ENTRY INTO THE MAINTENANCE MODE Press the [Menu] and [Start] keys. Next press the [/\] key four times to make the machine enter the maintenance mode. FAX models equipped with ...
Question about Brother MFC Office Equipment & Supplies
...reset the purge count to zero. 5) Press the Stop/Exit key to return to the initial stage of the maintenance mode. 6) Press the 9 key twice to return to the standby state. Solution #1 works perfectly ...
Question about Brother MFC Office Equipment & Supplies
...maintenance mode. Your purge counter is now reset and you can now resume printing as normal. If however this has not cleared the error message I advise going through this guide again following the ...
...reset and than 99 to get out of maintenance. If this corrects the problem then OK but you may have a failing thermister in the fuser. If the problem happens again then change the thermister. If the ...
Question about Brother MFC Office Equipment & Supplies
reset purge counter 1) Enter machine maintenance mode (on MFC240C all four photo/copy/fax/scan lights flash in maintenance mode). Care is needed in maintenance mode, otherwise critical settings may be
Question about Brother MFC Office Equipment & Supplies
...several times to get to the Purge item 4. enter 2, 7, 8 and 3 using arrow/set keys to reset the counter 5. press Stop/Exit key to go to root of maintenance mode 6. enter 9,9 to exit maintenance ...
Question about Brother MFC Office Equipment & Supplies
...the LCD Press the 2, 7, 8, and 3 keys in this order to reset the count Press Stop/Exit key to return to initial Maintenance mode Press the 9 key twice to exit and return to normal operation. Good ...
reset purge counter 1) Enter machine maintenance mode (on MFC240C all four photo/copy/fax/scan lights flash in maintenance mode). Care is needed in maintenance mode, otherwise critical settings may be
8, and 3 keys in this order to reset the purge count to zero. 5) Press the Stop/Exit key to return to the initial stage of the maintenance mode. 6) Press the 9 key twice to return to the standby state
...(user programming remains intact) 95 protection 99 Exit maintenance mode" I would use the 01 and reset everything. Otherwise you can go through the 91 parameter list till you find the counter. ...
1,189 questions posted
Usually answered in minutes!
1,135 Questions
743 Questions
623 Questions
406 Questions
381 Questions
