Hotpoint Aquarius WF000 Front Load Washer "bottom weight" Questions

...bottom damaging the spider pulley. If the counter weight is firmly attached to the top of the washer drum and the belt is attached to the spider pulley and motor, remove the top cover and lower front ...

...cover, and you will see the concrete weight at the bottom, sometimes the securing nuts work loose, or break off. There is also a concete weight in the top of the washer as well,so check this as ...

the top plate, control panel and front cover in that order. for the front cover open the lid at the bottom left side and remove screws. The weights are held by a few screws remove them and the weights

tightened down, if its baging around on wash it can be weak support springs or weak shockers on the bottom

...weight at front of machine Generally its best if you wish to try yourself to use very heavy fireproof bricks as they are extremely heavy and dense.to do this you must remove the bottom plate which ...

...weight at the bottom of the washing machine today. The pegs that the bolts screw into have broken off with age. Is there any method of effective securing the counter weight to the rear of the washing ...

...bottom weight on hotpoint wm63p washing macine. i replace these weights regularly and tighten them up as tight as i can get them (and i am a big chap) so as tight as you can get them with a ratchet ...

...lvel it is ok Check the bottom of the tub for a loose counter weight. it may have come loose or fallen off. Here is a link to a diagram that shows the counter weight. It is number 13 on the

...bottom damaging the spider pulley. If the counter weight is firmly attached to the top of the washer drum and the belt is attached to the spider pulley and motor, remove the top cover and lower front ...

...spring, where does it attach? 4 springs on bottom of washer 3 from tub to top of base hidden, 1 from rear tub to bottom of base straight down, hole in inner lip of base, to counter weight of