Hotpoint Ultima WD72 Front Load Washer/Dryer "put metal clip dryer door" Questions

Ad

Question about Hotpoint Washing Machines

2 Answers

...PUT DRYER RACK INTO WHIRLPOOL CABRIO #WGD6600VWO If it is a dryer with the lint screen on top place the two ends of the metal loop into the two holes closest to the plastic clips on the bottom of the ...

Ad

Question about Frigidaire Washing Machines

3 Answers

...put them through the wash, but couldn't figure out what the plastic part was. Since a few people also found this part number in their dryer, I stuck my head in and saw where it came from...  ...

Ad

Question about Washing Machines

2 Answers

...metal clip can be a pain to work with! 9. Drum should just be hanging from 2 large springs. Remove the clips/spring holders that go over the top of the springs so they can be lifted and removed from ...

...Put on back and top.  20. Run load, check for leaks. Note: back panel is structural and should be on for a load to be run.  21. Should be done. Total time 3+ hours. I hope this helps anyone ...

Question about Washing Machines

1 Answer

...metal clip can be a pain to work with! 9. Drum should just be hanging from 2 large springs. Remove the clips/spring holders that go over the top of the springs so they can be lifted and ...

Question about Zanussi Washing Machines

4 Answers

...put the clothes for drying for 10 minuits and the 10 minuites doesn't change at all even though the machine is drying. But now ,I cannot stop the drying by pause and skip/reset. hi Most washing ...

Question about Roper Washing Machines

1 Answer

...Put on back and top.  20. Run load, check for leaks. Note: back panel is structural and should be on for a load to be run.  21. Should be done. Total time 3+ hours. I hope this helps anyone ...

Question about Whirlpool Washing Machines

1 Answer

...metal clip can be a pain to work with! 9. Drum should just be hanging from 2 large springs. Remove the clips/spring holders that go over the top of the springs so they can be lifted and ...

Question about Frigidaire Washing Machines

1 Answer

...Put on back and top.  20. Run load, check for leaks. Note: back panel is structural and should be on for a load to be run.  21. Should be done. Total time 3+ hours. I hope this helps anyone ...

Question about Hotpoint Washing Machines

1 Answer

metal cir clip holding it to the main drum. Inside is a white molded cone and a big white ball which floats. You will find a lot of junk here, clean out thoroughly. To refit put white cone back inside

Not finding what you are looking for?
Hotpoint Ultima WD72 Front Load Washer/Dryer Logo

196 questions posted

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

vince

Level 3 Expert

2530 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Paul Carew

Level 3 Expert

3808 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...