Hotpoint Ultima WD72 Front Load Washer/Dryer "hold door fitting hinges" Questions

...seal off of front panel, Pick up metal bracket. Now with the hinge attached to door hold in place and place bracket behind the two holes fit screws and then fit the seal and clip.   ...

washing machine fit a new door on a hotpoint washing machine You need to remove the wire clamp that holds the door seal on to the front of the cabinet, then pull seal off. This will give you access to

...hold the 2 halves of the door together, then prise apart the the 2 halves.. Replace the door hinge. Reassemble in reverse order. Please rate my solution. Thanks. In addition to Solution #1 it is ...

...door undo the screws and simply seperate the 2 halves and the 2 lugs that hold the hinge lift off get a small probe to push the broken lugs out of the fittings insert the new hinge put the 2 halves ...

...but can't get the old housing off to insert the new. Can you please help? there are four screws holding the hinge on to the machine. two are visible in the hinge from the front but there are two ...

...door handle kit but having trouble fitting it. Can you please offer any tips? Thank you Open the door fully. Remove the door by unscrewing the two screws in the hinge. You will need a T20 star ...

...hold the door latch assembly in place. This is on the right hand side of the door opening. You can leave the latch in place as long as you remove the screws and push it inside slightly to remove it ...

back in original position screw the hinge and back onto the machine. (You might need someone to hold the door in place for you....it makes it much easier). Finally screw the top of the machine back on

...hold the door latch assembly in place. This is on the right hand side of the door opening. You can leave the latch in place as long as you remove the screws and push it inside slightly to remove it ...

...hold the door latch assembly in place. This is on the right hand side of the door opening. You can leave the latch in place as long as you remove the screws and push it inside slightly to remove it ...