Hotpoint Aquarius WD640 Front Load Washer/Dryer "pressure doesnt enough" Questions

doesnt seem to be taking in enough water as there is most of the washing tablets left in the drawer. any ideas? Cheers Close your faucet valve & unscrew your hoses to check screens on hoses & machine.

doesnt go to next cycle Your pressure switch stops the water and allows it to start the next cycle. It's a switch either in the control panel or at the top of the tub with a small tube connected to it

...with enough water. I have to either add water manually or wash really small loads. Doesnt seem to matter what setting it is on. Sounds like a pressure switch problem unless it's a low water ...

...doesnt come out just got the pipes unfroze and the water is now going in the washer..why is it not coming out into the tub? Possibly, chunks of ice, may be blocking the entrance to the tub or still ...

...doesnt spray until the wash cycle is almost over. Unit used to spray the clothing almost immediately upon starting any of the wash cycles. Now my clothes are NOT WASHING PROPERLY. BOOOOO!!!! is it ...

...Pressure switch/sensor?) Repairman replaced timer (they always go on this model), but, predictably this "repair" did not fix the problem. if the water doesnt shut off when you unplug the machine,then ...

...doesnt happen at medium and small settings as of yet. Is it possibly the water pressure switch has gone bad but why only on the larger capacity settings? I would appreciate any help you could offer. ...

...pressure .... so the machine isnt filling fast enough so check at the machine side of the cold water filler hoze in the machine end is a filter cone you need to carefully pull it out with flat nose ...

...inside them they get weak and with the pressure of the water they stop spinning which doesnt push your the water through the motor fast enough to drain properly replace and you will see the ...

...doesnt shut off causing it to over flow, but the pump is working If it fills with water and starts the cycle and the water keeps running in then your water inlet valve on the back where the water ...