Hotpoint SY36 Style Line Stainless Steel Electric Single Oven "broiler works bake mean electric" Questions

...works but nothing happens in the oven. First your broiler heating element may have gone bad and now you oven heating element may have gone bad. Using an OHM meter disconnect them and test for their ...

...findings while the machine is without power amigo. More than likely you needs an expensive new control board. You could just remove and tape off one of the broiler wires if the bake still

...works fine as does everything elase (timer, light, clock, fan, etc). Any suggestions? Thanks. Reseating the Element The broiler is heated using an electric element which should be clipped in to the ...

bake nor the broiler heating elements heat, but the range burners still work, the clock may be set for a timed or self-cleaning cycle. Check to be sure the clock buttons and knobs are set properly. If

bake or the broil to turn on it comes up E1 F1 . I do not know what this means and i can not find manual. It is a kenmore glass top oven and is about 10yrs old. Not sure if these have fuses in them or

broiler works normally. The heating element allows current through. Repair technician says the clock-timer/electronic oven control is the problem. Is he on the right track? If so, where can I purchase

...bake, but just on the top. Like its going into broiler mode. When I turn the oven off, the top element stays red for 5-10 minutes. I haven't gotten any error messages until this last time and then it ...

broiler, and burners work great. Oven itself has an electric pilot lite that's working but not heating up the rest of the oven. Any suggestions? I can only assume from your description you mean to say

...broiler or bake elements are working I would suspect either the sensor - sensing a higher temperature than set meaning the sensor is defective (Item #29 on the diagram) - ...

...works. Any suggestions as to what can be happening with the oven and how to repair? Thanks in advance. If you are hearing a clicking sound, that would be the igniter trying to light the gas, however ...