Sony Handycam DCR-TRV350 Digital Camcorder "tape wont close" Questions

tape door wont close the tape door wont close i've changed the batteries and everything can you help me also is there a vcr tape adapter for this handycam I'm having a similar problem. The camera is a

...n50. When i put a cassette in it wont close the door and as a result the tape carrier wont return into the machine You may have to close the holding mechanism of where tape go in NOT the actual

...tape wont close there is a risk of hardware damage.make sure you dont force the tape into the cassette compartment to avoid damage to the unit or tape.here's what you can do. 1.remove the tape from ...

...tape ejector wont close when i put a tape in. it powers up just fine, wondering if there is a simple solution to fix this before i take it in somewhere. Thanks Hello, Sounds like a possible tension ...

...tape i push the door down and it wont stay. it pops up so i cant close it at all Its a mechanism problem , you need to take it to service centre , will cost about $100 in India cannot help sorry I ...

tape carrage wont load the tapes. the tape carrage wont load the tapes but it will go into the load position without. I have a sony cam myself. If the cam is empty, you open the outer door(swings out)

Wont load tape The camcorder does not load the tape. I put it in the tray and closes, and the process of loading the cassette starts, but get blocked halfway. After a while, an error beep comes, and ...

tape door wont close on my Sony CCD-TR416 camcorder Try this for anyone having this issue: HERE'S WHAT WORKED FOR ME PER SONY TECHS: Take OUT the battery or disconnect the AC cord. Turn ...

...tape deck wont open! it pops out of the cam' but doesn't open to allow me to put in a tape, then goes back inside the cam' please help thanks hugo when mechanism pops out to eject, wait until it ...

...tape the mechanism wont close. There is a latch or something inside which wont engage. Any fix? IMPORTANT: If your camcorder model has a RESET button, first try pressing this button. If there is no ...